LED High Bay Linear Light
HL Series

Advantage:

  • Linear LED high bay and low bay fixtures are available in a variety of light distributions including medium beam fixtures and wide light distribution designs.
  • Narrow and medium distribution fixtures have a Type 1 or Type 5 light distribution. These distribution types are ideal for aisles or higher ceilings.
  • Placing fixtures parallel to aisles is approximately 50 percent more efficient than a perpendicular alignment and helps decrease eye strain. This layout is also easier to control with motion sensors.
  • Wide distribution fixtures give off a broader light distribution and are better suited for open layouts to provide a uniform light for commercial buildings and areas.
  • Fixture with a medium light distribution are somewhere in between. The light distribution is round rather than linear, but the beam is more concentrated, casting very little of the light outside of a 0-270 degree zone
Linear High Bay Light HL Series
Aluminum Linear High Bay Light HL Series

Medium beam fixtures and wide light distribution design

  • Main Material: Aluminum 6063+PC cover
  • Fire resistance : 850°C/PC
  • Detachable drives : non-dimmable, 1-10V/DALI dimmable.
  • Lighting source: SMD2835/3030, CRI 80Ra or 90Ra
  • PC cover : Clear or Opal optional
  • Luminous efficacy: up to 130lm/w
  • IP rate: IP40
  • Lifespan: over for 50000 hours.

Function

0-10V +Day light sensor

  • The brightness will be Automatically adjusted as the day light changing.
  • With sufficient ambient light, the sensor does not switch on the lamp.
Linear High Bay Light HL Series in Workshops
Linear High Bay Light HL Series Installation

Installation Methods

  • Hook Hanging: Fixed the Hook to the ceiling
  • Suspension: Connect the light fixture to the ceiling with Hanging rope

Specs

Technical Parameters
ModelOL-HL150W-600
Power150W
Luminous flux / Eff.19500lm
130lm/W
DimensionL600*W420*H52mm
Input VoltageAC220-240V/AC100-277V(for US market)
Power factor ( P.F. ) >0.95
LED sourcePhilip SMD 3030,   CRI>80Ra, CRI>90Ra for Option
Lamp body colorTransparent/Frosted(Milky)
Metal End Cap colorWhite / Black / Tungsten Grey
Driver BrandOsram / Meanwell
IP GradeIP40
Beam angle120°
Housing materialAluminum ,  PC / V.0
Working temperature-20°C~+50°C
Lifetime50000 hrs
Warranty time 3-5 years

Technical Parameters
ModelOL-HL200W-600
Power200W
Luminous flux / Eff.26000lm
130lm/W
DimensionL600*W420*H52mm
Input VoltageAC220-240V/AC100-277V(for US market)
Power factor ( P.F. ) >0.95
LED sourcePhilip SMD 3030,   CRI>80Ra, CRI>90Ra for Option
Lamp body colorTransparent/Frosted(Milky)
Metal End Cap colorWhite / Black / Tungsten Grey
Driver BrandOsram / Meanwell
IP GradeIP40
Beam angle120°
Housing materialAluminum ,  PC / V.0
Working temperature-20°C~+50°C
Lifetime50000 hrs
Warranty time 3-5 years

Technical Parameters
ModelOL-HL200W-900
Power200W
Luminous flux / Eff.26000lm
130lm/W
DimensionL900*W420*H52mm
Input VoltageAC220-240V/AC100-277V(for US market)
Power factor ( P.F. ) >0.95
LED sourcePhilip SMD 3030,   CRI>80Ra, CRI>90Ra for Option
Lamp body colorTransparent/Frosted(Milky)
Metal End Cap colorWhite / Black / Tungsten Grey
Driver BrandOsram / Meanwell
IP GradeIP40
Beam angle120°
Housing materialAluminum ,  PC / V.0
Working temperature-20°C~+50°C
Lifetime50000 hrs
Warranty time 3-5 years

Technical Parameters
ModelOL-HL300W-1200
Power300W
Luminous flux / Eff.39000lm
130lm/W
DimensionL1200*W420*H52mm
Input VoltageAC220-240V/AC100-277V(for US market)
Power factor ( P.F. ) >0.95
LED sourcePhilip SMD 3030,   CRI>80Ra, CRI>90Ra for Option
Lamp body colorTransparent/Frosted(Milky)
Metal End Cap colorWhite / Black / Tungsten Grey
Driver BrandOsram / Meanwell
IP GradeIP40
Beam angle120°
Housing materialAluminum ,  PC / V.0
Working temperature-20°C~+50°C
Lifetime50000 hrs
Warranty time 3-5 years

Technical Parameters
ModelOL-HL400W-1200
Power400W
Luminous flux / Eff.52000lm
130lm/W
DimensionL1200*W420*H52mm
Input VoltageAC220-240V/AC100-277V(for US market)
Power factor ( P.F. ) >0.95
LED sourcePhilip SMD 3030,   CRI>80Ra, CRI>90Ra for Option
Lamp body colorTransparent/Frosted(Milky)
Metal End Cap colorWhite / Black / Tungsten Grey
Driver BrandOsram / Meanwell
IP GradeIP40
Beam angle120°
Housing materialAluminum ,  PC / V.0
Working temperature-20°C~+50°C
Lifetime50000 hrs
Warranty time 3-5 years

Technical Parameters
ModelOL-HL400W-1500
Power400W
Luminous flux / Eff.52000lm
130lm/W
DimensionL1500*W420*H52mm
Input VoltageAC220-240V/AC100-277V(for US market)
Power factor ( P.F. ) >0.95
LED sourcePhilip SMD 3030,   CRI>80Ra, CRI>90Ra for Option
Lamp body colorTransparent/Frosted(Milky)
Metal End Cap colorWhite / Black / Tungsten Grey
Driver BrandOsram / Meanwell
IP GradeIP40
Beam angle120°
Housing materialAluminum ,  PC / V.0
Working temperature-20°C~+50°C
Lifetime50000 hrs
Warranty time 3-5 years

Benefits

In addition to standard products, we can also customize your size, color temperature, power function, luminous efficacy of light source, connection method, label style, your logo, packaging and so on.

FAQ of Linear Hight Bay Light(HL series)

We offer transparent PC cover, the lighting effect up to 150lm/w, frosted PC cover. The lighting effect up to 130lm/w.

The high bay linear light very suitable use in big warehouse and big workshops.

Your LOGO and package, the instruction manual and the color of LED can be according to your requirements.

Connect the power cord lamps: Brown line, identified as “L”, to connect to LIVE; blue line, identified as “N”, connected to NEUTRAL; Green / Yellow wire, the ground wire is connected to ground

The standard colors of this product are: black, white, tungsten steel color, especially tungsten steel color is particularly popular.

Video of Linear High Bay Light

Linear High bay 28
Play Video

HL series

Contact Us Today, We Will Get Back To You Immediately

Your information will be kept strictly confidential.

We will contact you within 1 working day, please pay attention to the email with the suffix @olamled.com

Vicky

Hi there, I am Vicky Zhang, the CSO of OLAMLED, me and my team would be happy to meet you and learn all about your business, requirements & expectations.